Skip to content

Archive

Fedora

2 articles
Linux 28 Oct 2026 6 min read

Linux 7.3 on Fedora: Why Kernel, Modules, and Initramfs Must Match

Compiling Linux 7.3 produces a kernel image, but that image is only one part of a bootable Fedora installation. On a typical Fedora system, boot also depends on kernel modules, an initramfs assembled for the correct release, and a boot entry pointing to those artifacts. A mismatch can leave a perfectly compiled kernel unable to mount its root filesystem. This matters when using the upstream source from kernel.org rather than Fedora’s kernel RPMs. Fedora’s package installation normally coordinates several boot artifacts. A manual upstream build leaves that coordination to the administrator. The example below assumes an ordinary x86_64 Fedora installation managed with GRUB and grubby, not an rpm-ostree-based desktop.

Linux Fedora
Linux 19 Sep 2026 4 min read

How Linux Maps an ESP32 USB-UART Bridge to /dev/ttyUSB0 on Fedora

An ESP32 development board connected through a CH341 USB-to-UART bridge does not appear on Fedora as a Windows-style COM port. Linux binds the USB interface to a serial driver and exposes a character device such as /dev/ttyUSB0. A working connection can produce this kernel message: usb 5-1: ch341-uart converter now attached to ttyUSB0 That line confirms USB enumeration, binding to the ch341 serial driver, and creation of ttyUSB0. The path used by a flasher or serial monitor is therefore /dev/ttyUSB0.

Linux Fedora